Tiffen Steadicam M-2, System Manual, Page: 4 / 54

4
NOTE: Just like the M-2, this manual is intended for experienced, professional Steadicam operators. As such, it includes mostly
technical information about the hardware. If you’re interested in learning more about operating, go pick up a copy of The Steadicam
Operator’s Handbook, by Jerry Holway and Laurie Hayball. And if you haven’t attended a Steadicam Workshop yet, come take one of
our amazing week-long Gold-level workshops, and bring your new M-2! Sign up at: Tiffen.com/flysteadicam
T
he Steadicam M-2 is the most integrated and adaptable Steadicam system ever created. Not only
does the M-2 offer a lighter weight and lower cost high-end system, it also features the revolutionary
Steadicam Volt™ technology built right in for a sleeker, more versatile rig!
The Volt electronics are seamlessly integrated into the low-profile top stage, and inside the all-new gimbal,
to decrease the distance between the top of the gimbal and the top of the stage, as well as reduce weight.
This revolutionary technology is designed to complement rather than oppose normal operating by actively
assisting in holding virtually any tilt or roll angle, including a perfectly level horizon. This gentle assistance
helps remove the unwanted effects of wind, acceleration, or natural body movement in the captured image.
The M-2 also takes the concept of modularity to a
whole new level. Each component offers options for
customization:
Rigid carbon fiber posts are available in a variety
of lengths and diameters (1.75” 2 or 3-section
post, and 1.58” standard or short-post.) The sled
base can be built with either Gold mount or V-lock
battery plates. A hot-swappable 3rd battery mount
is available. The lightweight, redesigned, quick-
release monitor mount uses industry-standard
60mm rod spacing and is compatible with a variety
of professional monitors. The gimbal fits multiple
post sizes. And both standard and tilt top stages are
available with or without Volt electronics built in.
This modularity allows M-1 and M-2 components to
be configured in multiple combinations to suit each
operator’s preferences, or additional pieces can
be purchased for adapting the sled, based on the
needs of your projects.
The Steadicam Modular series is super
configurable, rigid, precise, tool-free, highly-
adjustable and fast. Above all, it’s as close to
future-proof as a rig can be.
Good luck with your new Steadicam M-2!
Evolution of the Steadicam M-Series