/5
Termination Jumper Settings
The factory default setting for all 75
!
termination jumpers for Composite, S-Video and Component inputs is set to on, or
terminated.
Jumper
JT1
Composite video-in terminator enable
Open = composite video input is not terminated
Close = composite video input is terminated with 75
!
.
“Only applies to video signals input via the Video BNC connector
or via the 4-pin Hirose and 8-pin Lemo connectors when optional
frameline generator is not installed.)
JT2
S-Video luma-in terminator enable
Open = S-video luma input is not terminated
Close = S-video luma input is terminated with 75
!
JT3
S-Video chroma-in terminator enable
Open = S-video chroma input is not terminated
Close = S-video chroma input is terminated with 75
!
JT4
Component luma-in terminator enable
Open = component luma input is not terminated
Close = component luma input is terminated with 75
!
JT5
Component Cr-in terminator enable
Open = component Cr input is not terminated
Close = component Cr input is terminated with 75
!
JT6
Component Cb-in terminator enable
Open = component Cb input is not terminated
Close = component Cb input is terminated with 75
!