Pag. 4 / 9 DMAN63W0000020-2Ways2 Manual - System100 Hydro STD2
2
Control Panel
2.1
The Keys
Key
Function
Description
On/Off
Ignition and Extinguishing of the boiler/stove by pushing the button for
3 seconds
Unlock
System Unlock by pushing the key for 3 seconds
ESC
Esc
Menu exit function
SET
Set
Enter in Submenu, modify and save data
Thermostat Modify
Radio Room Thermostat modification
Scroll
Menu
and
Submenu
Scroll Submenu and
Menu
Sleeping Mode
By pushing the button when the display is on the main frame, the
remote control will continue to work, but the display will switch off. To
switch on the display push the button again.
Standby Mode
By pushing the button for 3 seconds when the main frame is displayed
,it is possible to switch off completely the remote control and thus
reduce the battery consumption. This feature is to be used in case of
prolonged non-use of remote control. If the function is activated, the
system uses the room probe connected to the Controller.
To switch on the remote control push the button
twice.
2.2
The Display
Pushing the button
the display turns on and the main frame appears.
-Errors:
Er01: Error Safety High Voltage 1. Also with the system Off.
Er02: Error Safety High Voltage 2. Only if the Combustion Fan is On.
Er03: Extinguishing for exhaust under temperature.
Er05: Extinguishing for exhaust over temperature.
Er06: Pellet Thermostat open (backfire in the brazier)
Er07: Encoder Error. No Encoder signal.
Er08: Encoder Error. Combustion Fan regulation failed.
Er11: Real time clock error, day and time not correct due to prolonged absence of power supply
Er12: Extinguishing for Ignition failed.
Er15: Lack of voltage supply.
Er17: Air Flow Regulator error.