manualshive.com logo in svg

Tieline Commander TLF200, Operation Manual, Page: 47 / 53

Share
Download
Tieline Commander TLF200 Operation Manual Download Page 47

COMMANDER  

TOOLBOX 

Software 

©

Tieline Technology

 

- 47 - 

August 2002

 

Software Upgrade 

 COMMANDER operating software is frequently updated as a result of our continuing commitment 
to product development. 
The latest & greatest version is available for download from our website. 
Use this screen get the software to be downloaded into the COMMANDER. 
 

 

 

Connect COMMANDER to the computer “COM” port with a standard modem cable.

 

Start Toolbox and establish data communication. 

•

 Select the upload tab on the Toolbox  

•

 Click on the "Setup for Upload" button-a file selection dialogue box should appear  

•

 Turn the COMMANDER off and then turn the power back on 

•

 Select the file to be uploaded and click “CPU Upload” 

•

 Message "Upload successful" should appear at the end of the process 

After an upgrade, go to the COMMANDER "Options Menu”. 
Then select “Reset Functions” and finally select "Reset Settings". 
This will delete any settings attached to the old operating system. 

NOTE:

 It may also be necessary to reset the old function list with “Reset Funct Mem”. 

 
On early firmware versions: 

•

 Switch off COMMANDER by disconnecting the power 

•

 Hold down the 'ENTER/DIAL' key on COMMANDER and reconnect the power 

•

  Release the enter/dial key after power is connected 

•

 A message should appear on the COMMANDER requesting a key press (#5) key  

•

 Quickly press the number '5' on the key pad  

•

 The display should display " waiting for upload”  

•

 Proceed with the upload as above 

Summary of Contents for Commander TLF200






















































Reviews:

No comments