COMMANDER
DETAILED
CONFIGURATION
©
Tieline Technology
- 23 -
August 2002
Sub Menus of 01
–
View Configuration (Contd)
ISDN Codec
Music
Provides the highest quality 15KHz audio with 100ms
delay.
G722
Provides 7KHz audio with 30ms delay.
Serial Port
Toolbox
Configures the serial port for use with a Computer using
the
Toolbox
software.
Data
Use for low speed (200bps) data applications such as
remote control or intercom using a TTY terminal.
Disable
Disables the serial port for use with the Toolbox
application.
Auto Reneg
No
(Disable)
Setting for live program links. Prevents data
renegotiation if line conditions change.
Note:
Use of auto-renegotiation can cause unexpected
program breaks with changes in line conditions.
Up only
Uses higher bit rate if LQ at both ends is above 80%.
Down Only
Lower bit rate used if LQ falls below 10% at either end.
Up and Down
Auto renegotiation as line conditions vary.
Sync Mode
Reserved for future use
(see
www.tieline.com
for the latest software
updates)
POTS Auto Ans
Yes (Enable)
COMMANDER automatically answers incoming calls.
Disable
COMMANDER will not automatically answer incoming
calls.
POTS Redial
No (D
isable)
If dialed number is busy, COMMANDER will not redial.
Enable
If dialed number is busy, COMMANDER redials the
number for a selectable number of retries.
POTS Reconnect
No
(Disable)
If a link fails, COMMANDER will not attempt to
reconnect with the remote TIELINE Codec.
Enable
If a link fails, COMMANDER will hang up and attempt to
reconnect with the remote TIELINE Codec.
Note:
Ensure auto answer is enabled in the remote unit.