COMMANDER
DETAILED
CONFIGURATION
©
Tieline Technology
- 30 -
August 2002
Sub Menus of 06 – ISDN Setup
01 ISDN
AutoAnswer
Enable
Tieline will automatically answer an incoming ISDN call.
Disable
When disabled the screen will notify an incoming call with
option to answer or not.
02 ISDN
Network
001 Nat–1&2
For North American ISDN Only.
002 DMS–100
For North American ISDN Only.
003 AT&T
For North American ISDN Only.
03 ISDN 56K
Mode
Disable
Standard connection is 64K.
Enable
Some North American Networks use 56K. Check with your
carrier to determine if this is applicable.
04 Local
SubAddress
Enter Number,
then select OK
A number of ISDN devices (including several Tielines) may
share a common ISDN connection. Allocating sub addresses
prevents all devices simultaneously trying to answer an
incoming call.
Example: calling an ISDN Tieline with sub address “4”
0011 61 89249 6688 * 4. (where the “
*
” and “4” are the sub
address details)
NOTE – sub address *1 is not permitted.
05~08 SPID
1 or 2 with &
without
numbers
Enter Number,
then select OK
Service Profile ID (SPID) numbers requested on most North
American ISDN Networks.
09 ISDN
Upgrade
Cancel
Upload
This process uploads new ISDN Software using a computer
and the Toolbox software.
10 ISDN
Details
Displays software details of the COMMANDER ISDN.
11 Reset
ISDN
Resets the ISDN interface module.
12 Exit
Menu