TCSG5416W Wireless Sounder Installation manual
Ver1.3 202102
YINGKOU
TI
A
N
C
HENG
FIRE
PROTE
C
TION
EQUIPMENT
C
O.,
LTD
1
1.Overview
The TCSG5416W wireless sounder (hereinafter referred to as sounder) is suitable for installation
in public places, factories and other environments, and is used in conjunction with the
JB-TB-TC5126W wireless sounder control panel (hereinafter referred to as the panel). When the panel
receives the sounder command from other fire alarm equipment, the panel activates the siren through
wireless signals, and the siren emits sound and light signals to achieve the purpose of sounder.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on,the user is encouraged to try to correct the interference by one or more
of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
--Consult the dealer or an experienced radio/TV technician for help.
Important: You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
2.Features
2.1. Adopting 470MHz wireless communication technology, no need to pre-buried wiring, easy and
quick engineering installation;
2.2. With battery undervoltage detection function, it can remind users to replace the battery in time;
2.3. Use microprocessor to realize signal processing, and use digital signal to communicate with control
