![background image](http://html.mh-extra.com/html/thyssenkrupp/flow2/flow2_assembly-instruction-manual_1113964014.webp)
2007.03.07
Flow2 stairlift
Tab 04: Install, adjust and release
www.ThyssenKruppAccessibility.nl
12
Assembly
3.2
Preparing to drive onto the rail
1. Remove the service cover.
2. Fit the fuse (40 A) in the drive unit, the fuse is located in the handle.
3. Turn on the drive unit by pulling the red main switch, on the rear of the drive unit, up a few
millimeters.
4. Check that the mode knob on the service board is set to mode 3.
Fig. 3-1
Prepare the drive unit
1
1
1
Fig. 3-2
Remove the service
cover
1
Fig. 3-3
Fuse in drive unit
1
Fig. 3-4
Switch on drive unit
1
TIP
When switching on the lift an audio signal will be heard. The three-digit release number
will also be shown in the service unit display.