PARTS CHECK LIST
WING
1. Glue the CA hinges in aileron first.
2. Next attach the aileron in place then apply CA on both
sides. Make sure aileron is firmly glued.
3. Locate the aileron servo well then use a hobby knife to
cut an "X".
4. Using a sealing iron to tack down the covering inside
the servo well. Trim the excess covering away.
5. Locate the left wing servo case / hatch cover; secure
the aileron servo as shown.
6. Connect an extension wire for Aileron servo, heat-
shrink or tape the connectors to prevent from loosening.
7
6
Elevator Wood Push Rod (1)
Elevator Pushrod Retainer (1)
Thread Pushrod(2)
Control Horn (L/2)
Control Horn (S/4)
Backplate (S/4)
Canopy (1)
Wheel Door (L/1, R/1)
Wheel Well (L/1, R/1)
Upper Retainer A (2)
Upper Retainer B (2)
Lower Retainer (2)
Retract (L/1, R/1)
Wheel Axle (2)
Wheel (2)
Brass Tube (8)
Straight Threaded End (4)
Z Bend Threaded End (2)
Wire (2)
Tail Gear (1)
Tail Wheel Fork (1)
Wheel Spacer (1)
Steering Horn (1)
3x5mm Set Screw (1)
Tail Wheel (1)
Blind Nut (2)
2.6X26mm Sink Head Screw (1)
Decal A (1)
Decal B (1)
Silver Decal (2)
Kit Contents:
FRP Fuselage (1)
FRP Cockpit (1)
FRP Tail Cover (1)
FRP Cowling (1)
FRP Wing Joiner Tube (L/1)
FRP Tube (S/1)
Left Wing (1)
Right Wing (1)
Rudder (1)
Horizontal Tail (1)
Elevator (L/1, R/1)
Aileron Servo Case (L/1, R/1)
Flap Servo Case (L/1, R/1)
Plywood Parts(A)
Plywood Parts(B)
Plywood Parts(C)
VT Lower Trailing Edge (1)
VT Upper Trailing Edge (1)
Doubler(28)
Dowel (4)
Covering (1)
Fiber Cloth (1)
Joiner Wire (2)
Joiner Tube (2)
Rubber Band (2)
CA Hinge(23 )
2x5mm Wood Screw(8)
2.6x 5mm Wood Screw (2)
2x8mm Washer Wood Screw(24)
2.3x12mm Washer Wood Screw (24)
3x20mm Wood Screw (2)
2x8mm Machine Screw (2)
2x15mm Machine Screw (4)
2x22mm Machine Screw (4)
2 x30mm Machine Screw (2)
3x16mm Sink Head Screw (8)
4x20mm Sink Head Screw (2)
3x3mm Setscrew (5)
EZ Connector(1)
M2Washer(1)
Torque Wire (1)
M2 Nut (15)
Clevis (10)
Collar (2)
Ball End (2)
Ball (2)
Al. Spinner (3-blade, 1)
Backplate (1)
Bushing (1)
Adaptor (1)
Spinner Bolt (1)
Engine Mounting Beam (2)
T Washer (8)
Rubber (8)
Blind Nut (4)
Socket Cap Screw 5mm x 40 (4)
Hex Wrench 4mm (1)
Socket Cap Screw 6/32 x 20mm (4)
Socket Cap Screw 4x20mm (4)
Tank (1)
Silicone Tube (1)
Straight Nipple (1)
90-degree Nipple (1)
Crank Weight (1)
Fuel Stopper (1)
Fuel Cap (1)
Throttle Pushrod (1)
Retract Pushrod (2)
Flap Pushrod (2)
Aileron Pushrod (2)
Hex Wrench 1.5mm (1)
