THUNDER LASER
NOVA-51
www.thunderlaser.com
DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
No.197, Hudong Road, Shatian Town,
Tel :(86)769 826653
Dongguan, Guangdong, China
24
3.7.3 Connecting the Exhaust System
How to set up the exhaust system
Insert one side of the gray exhaust pipe into the fan inlet and the other side into the
fuselage behind the exhaust tank. Insert one side of the gray exhaust pipe into the fan
outlet and put the other side of the pipe outside where you work (If the machine is far from
the outside of the room that the gas manufactured by the machine cannot be discharged;
then you might need an dust/fume filter, it can keep the air quality of your working
environment well).
Please refer to the following pictures about how to install the exhaust pipe:
Also you can refer to the video on how to set up your Nova laser machine in our website
http://www.thunderlaser.com/how-to-use-your-laser-machine/how-to-setup-your-nova-laser-cut
ter.html
The input voltage must correspond (AC 230V 50/60 Hz or AC 115V 50/60 Hz)
– see
information label beside the connection socket.
