THUNDER LASER
NOVA-51
www.thunderlaser.com
DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
No.197, Hudong Road, Shatian Town,
Tel :(86)769 826653
Dongguan, Guangdong, China
31
20. PC connection port(USB)
This USB is for connecting computer.
21. Right side door
There are laser controller, driver(Hybrid Servo Drive and Micro Stepper Drive ),
power supplier (both 24v DC and 36vDC), the main connecting cables and cooling fan
here, please open this door for checking these parts, but must pay attention to the
electric current. if you need to repair, please contact with professional maintenance
staff.
22. Right-up side door
Maintenance for the Emergency stop button if required
This door is locked by using outside locks.
23. Indicate light
The light is always keeping green color while the laser does not work or working but
the lid is closed.
The light will turns to red color while the lid/cover is opened during working.
24. Laser supply socket
To connect the main power and the extend power according the label information. And
in the main power socket have the fuses.
25. Laser tube cover
There are installed the laser tube, red dot pointer device, beam combiner and the first
reflective mirror mount.
26. Exhaust hose
This is for installing the exhaust device.
27. Blow air port
This port is for connecting hoses of the air compressor.
28. Water in and water out
Both ports are for connection with water pump or water chiller.
29. Rear door
There are installed cables banks etc. please open this door for checking these parts,
but must pay attention to that electric current.
30. Manufacture
’s Label
It
’s Show you the laser information like serial number or manufacturing date etc.