Thunder Laser NOVA-51 User Manual Download Page 40

Page: 40 / 70

THUNDER LASER

NOVA-51

www.thunderlaser.com

DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD

[email protected]

No.197, Hudong Road, Shatian Town,

Tel :(86)769 826653

Dongguan, Guangdong, China

4.6 How to use the display

4.6.1 Function of the Buttons



Arrow buttons: control the movement of the laser

head.(also can be used to change the parameters in the control panel)



Z/U button: The Z/U key can be pressed when the system is idle or the work

is finished. On pressing this key, it will show some entries in the interface, each entry

includes some functions, Z axes move, U axes move, each axes to go home etc.



Reset button: reset the machine.



Pulse button: single press to draw a dot, press and hold to drill a hole.



Speed button: Set the speed of the current running layer, or set the

direction keys

’ move speed.



Min-Power button: Set the min laser power of the current running layer.

Summary of Contents for NOVA-51







































































Search results

Summary of Contents for NOVA-51

Reviews:

Related manuals for NOVA-51

Brands by name

Popular brands

Thunder Laser NOVA-51, User Manual

Search results

Summary of Contents for NOVA-51

Reviews:

Related manuals for NOVA-51

Brands by name

Popular brands