THUNDER LASER
MARS-160
www.thunderlaser.com
DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
Tel :(86)769 82665376
44
4.6.2 The main interface
When the system is powered on, the screen will show as below:
File：
Speed：
MaxPow ：
01
300mm/s
30.0%/30.0%
X
：
Y
：
Z
：
150.2
153.5
3000
mm
mm
mm
01 400 25.0
02 200 29.1
03 100 31.5
Idle
00.00. 00
Count
: 99 X : 180. 5 mm Y : 235. 6
mm
connect
Graph display
area
Graph layer
parameters
Running
Status
Working
Number
Running
parameters
Net Status
File dimension
Coordinate
Running
progress bar
Graph Display
Area: To display the whole file’s track, and display the running
track.
Running parameters: To display the running file
’s file number, speed, max power
etc.;
Coordinate: To display the current coordinate of X,Y and Z axes
Graph layer parameters:
To display the layers’ information of the current file,
such as max or min power, speed etc.. When system is idle, dblclick the layer,
then users can change
the layer’s parameters and the changing would be
saved.
Running Status: To display the current status of the machine, such as Idle, Run,
Pause, Finish, etc.;
Running Progress Bar: To display the progress bar of the current running file;
Working Number: To accumulate the work number of the current file.
File Dimension: To display the dimension of the current file;
Net status: To display the connecting status of the Ethernet.
When work is Idle or finished, all keys can be pushed, users can select a file to run, set
some parameters, preview to a select file etc. But, when work is running or paused, some
keys don
’t respond when they are pushed.
