THUNDER LASER
MARS-160
www.thunderlaser.com
DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
Tel :(86)769 82665376
24
3.8 Connections
Perform the connections exactly in the order described; otherwise electrostatic charging
can damage your computer and/or the electronics of the laser system.
3.8.1 Connecting the Mains
Connect one end of the mains cable with the connection socket at the rear side of the
laser device (see Figure below) and the other end with a protected power outlet.
Mains voltage and operating voltage must correspond (AC 220 V/50 Hz or AC 110 V/60
Hz)
– see information label beside the connection socket.
The machine (certain) Power Cable for each country was put inside the Tool box with
machine.
Under no circumstances switch on the device if the voltages do not correspond.
Tips
: The main fuses are located inside the connection socket and are accessible from
the exterior.
