THUNDER LASER
MARS-160
www.thunderlaser.com
DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
Tel :(86)769 82665376
32
8. Front door
Open this door for cleaning the waste after working.
9. Working table
The honey comb plate to be processed is put onto the working table. Put the material
on the working table for engraving & cutting
10. Y-axis
The motion system is that performs the mechanical movements in Y direction. The
Y-axis is visible in the working area.
11. Connection socket for rotary attachment(option)
Supplies the rotary attachment with the required electric signals.
12. Flap protection sensor
This is where Open flat protection exist. Laser will stop working once the cover has
been opened.
13. The display
You can control the X-axis, Y-axis and Z-axis manually by the display panel, it also
shows the working time, power, speed and the whole working time and affords many
function options(please view this chapter 4.3 for detail).
14. The rotate emergency switches
Once there
’s an accident happen (laser catch fire, laser out leakage) during working,
please turn off this switch immediately.
15. LED lamp
It
’s used for lighting the working table once turn the Main switch on.
16. Laser power switch
17. Main power switch
18. Ethernet port
This Ethernet port is for connecting computer.
19. U-disk connection port(USB)
20. PC connection port(USB)
This USB is for connecting computer.
21. Right side door
There are laser controller, driver(Hybrid Servo Drive and Micro Stepper Drive ),
power supplier (both 24v DC and 36vDC), filter, the main connecting cables and
