Thrush Aircraft S2R-T660, Maintenance Manual

Page: 50 / 300

THRUSH AICRAFT INC - T660 TURBO THRUSH
AIRCRAFT MAINTENANCE MANUAL
50 100 400
METAL EMPENNAGE
Daily
HRS HRS HRS
Check the travel of the movable surfaces.
Elevator up 27 degrees ±1 degree
Elevator down 17 degrees ±1 degree
X 1.
Rudder 22 degrees ±1 degree
Tab up 8 degrees ±1 degree
Tab down 22 degrees ±1 degree
Check for warped contours of the fixed surfaces due to
2. X X
improperly tightened brace struts.
Inspect horizontal stabilizer “V” struts, fittings, and hardware
X 3.
for security, cracks and corrosion.
Inspect electric rudder trim systems rod-ends, bell-crank,
electric linear actuator attachment hinge, trim tab, and trim tab
hinge for lubrication, general condition, and security. (Note: X X 4.
No maintenance required or recommended for the electric
linear actuator.)
Inspect all hinges for wear. Replace sealed bearings, if
X 5 .
needed.
6. Check security of all bolts. X
7. Check the external skins for general condition. X
8. Check the drain holes for obstruction. X
INTENTIONALLY LEFT BLANK
2 – 32
Effective: 12/17/03