Thrush Aircraft S2R-T660, Maintenance Manual

Page: 49 / 300

THRUSH AIRCRAFT INC - T660 TURBO THRUSH
AIRCRAFT MAINTENANCE MANUAL
50 100 400
Daily
HRS HRS HRS
INTENTIONALLY LEFT BLANK
Inspect all cables and end fittings for wear. Check for correct
X 2.
tension.
Check all push rods for loose bearings, endplay, straightness
X 3 .
and paint condition.
4. Check idlers and bellcranks for binding or for slack. X
Inspect the rudder pedals and the support brackets for
X 5 .
general condition.
Inspect the attachment of the control stick to the main torque
6. X
tube for slack and bearing wear.
Check control stick to main torque tube bolt for proper torque
X 7 .
(65 to 70 in. lbs.)
Check the aileron control stops for tightness and for condition
8. X
of fittings.
Inspect all push-pull tubes rod-end jam nuts for security.
Inspect all witness/inspection holes with a piece of .032”
X 9 .
safety wire to insure that all rod-ends are screwed far enough
onto the push-pull tubes.
10. Inspect the push rods for clearance to the structure. X
Inspect the trim systems for correct operation and for general
11. X
condition.
Remove control stick from main the torque tube bolt, inspect
X 12.
and replace bolt as required.
Effective: 12/17/03
2- 31