Thrane&Thrane Thrane IP Handset, User Manual

Page: 34 / 152

Chapter 2: Getting started
22 Establishing a connection using BGAN terminal
Establishing a connection
When the handset is connected to the BGAN terminal, it is automatically
registered in the terminal and assigned the first available local number, if the
start up option
Auto BGAN SIP is selected. If, for some reason, you need
another password or local number, you need to set up the following in the
handset and in the web interface of the BGAN terminal (the start up option
Auto BGAN SIP must be disabled!):
• User name
• Password
• Local number
For further information, see Changing user name and password for an
IP Handset on page 24.
If no SIM PIN is required
If the IP Handset is connected to a BGAN terminal where the SIM PIN is
disabled or has already been entered, the BGAN terminal automatically sets
up a communication profile (SIP profile) and assigns the first available local
number to the handset, if the start up option
Auto BGAN SIP is enabled.
If a SIM PIN is required
If the IP Handset is connected to a BGAN terminal where the SIM PIN is
required and has not yet been entered, you need to enter the SIM PIN for the
terminal. To do so, you need to know the Administrator user name and
password as well as the SIM PIN for the BGAN terminal.
Note
There may be 2 PIN codes for the system:
• one for the BGAN terminal (SIM PIN, described in this section)
and
• one for the IP Handset (described in To set up the PIN code for the
handset on page 78)