Thrane&Thrane Sailor 6081, Installation & User Manual

Page: 27 / 68

Chapter 2: Installation
20 Installing the Power Supply Unit and Charger
about the connected equipment. For configurations with one SAILOR 6081 in
one segment this can be done with the X-LINK jumper J500.
• Jumper J500 mounted: The SAILOR 6081 drives all equipment in the
primary segment.
• Jumper J500 not mounted: The SAILOR 6081 drives all equipment in the
duplicated segment.
In configurations with several SAILOR 6081 units in one segment you must
configure the individual SAILOR 6081 units with a software tool. For further
details see Setup of several SAILOR 6081 units in a segment on page 22.
Jumper W503 for termination of cross link
Terminate the cross link with a jumper in W503 in the first and the last Power
Supply Unit and Charger.
Micro NMEA 2000 T-connector: Part number 406100-931
NNEA 2000 Micro Device Cable (6 m): Part number 406100-040
Te
rm
in
at
e
(W
50
3)
Cross link Cross link Cross link
Te
rm
in
at
e
(W
50
3)
T-connector T-connector