38
probability of a correct identification under difficult reception conditions but prolongs
the scanning time as well. It is recommended to limit the number of frequencies/NID's
to 5 per satellite.
Scanning a satellite for NID-codes
Altering the satellite list can be done either by loading a new file or editing the existing
in the SatID menu.
If the ID receiver is connected to a low-band LNB-output, set LNB frequency to 9750
MHz. If it is connected to a high-band output, set LNB frequency to 10600 MHz.
Enter a new satellite by typing name and longitude in the fields below the satellite
list. Check "In view", "Usable" and select tracking mode "A", click "New".
Select the satellite by clicking on its name and enter frequencies, symbol rates and
NID's in the same manner. If no NID's are known, the satellite can be scanned as
follows:
Chapter 5: PC program, maintaining NID-tables
NID-tables