Benchtop Arc Lamp
Chapter 4: Getting Started
Rev C, September 28, 2018
Page 15
Connect the lamp cable to both the lamp housing and controller. Please notice that there is an arrow marker on
both the plug and the socket. Make sure those two makers are in line with each other, then lightly press the
connector onto the socket and turn the threaded cap screw clockwise to lock the connector using the included
1.3 mm hex key. To remove the cable, press the connector against the socket lightly and turn the cap screw
counterclockwise to unlock the connector.
Figure 20 Connecting the Lamp Control Cable
Plug the power cable into the power socket and the unit is ready to use.
WARNING
Always ensure the unit is powered off before connecting or disconnecting the lamp cable. Failing to
do so could damage the lamp.
Summary of Contents for SLS401
Page 1: ...SLS401 SLS402 Benchtop Arc Lamp User Guide...
Page 28: ...www thorlabs com...
