THORLABS SLS401, User Manual

Page: 11 / 28

Benchtop Arc Lamp Chapter 4: Getting Started
Rev C, September 28, 2018 Page 9
4.3.3. Controller Back Panel
Figure 11 Back Panel of Arc Lamp controller

C5. Cooling Fan

C6. Connector for Lamp Control Cable

C7. USB Connector (Reserved for Future Firmware Updates)

C8. Power Connector
4.4. Bulb Handling
WARNING
Always wear protective gloves when handling the bulb. Moisture and grease from hands left on the
bulb may affect the integrity of the bulb envelope, shortening the bulb lifetime. At worst, it could
cause the bulb to explode.
WARNING
The bulb contains compressed gas and may explode if the integrity of the glass envelope is
compromised. Always wear splinter-proof eyewear when handling the bulb.
The bulb of an arc lamp requires caution during handling. When handled correctly, the bulb is a very safe instrument.
However, improper handling may cause hazard to users.
The bulb of an arc lamp contains high internal pressure and would burst if handled incorrectly even when not in
operation, causing serious injuries. Always wear eye/face and body protection when handling a bulb. Never bump,
drop, apply excessive stress, or scratch the bulb.
Please always wear protective gloves when handling the bulb. Moisture and grease from hands left on the bulb may
affect the integrity of the bulb envelope, shortening the bulb lifetime. At worst, it could cause the bulb to burst.
Please only hold the bulb at its electrodes. Avoid holding the bulb at the glass envelope.
Keep the glass envelope clean at all times. If needed, clean any dirt, oil, or lint away from the bulb with alcohol and
a lint free cloth or tissue
When not using, always put the bulb in its original package and seal it.
C8
C5
C6
C7