2.2 The Graphics User Interface (GUI)
Figure 3
The LS5000 GUI Surface
Alternatively:
2) Start TXP_LS.exe directly.
In this case you must connect to the desired card in the corresponding mainframe
through the ‘Connection’ menu. Clicking ‘Connect’ opens the selection window for the
mainframe IP-address (see Figure 4). If necessary (ask your system administrator)
also enter the port-number and a timeout-value in the ‘advanced’ section (see Figure
5).
Click ‘OK’ and the program will yield a selection of all possible LS cards, which are
accessible. Not shown are cards, which are in use by another program / operator.
(See Figure 6). Select the card you want to use and confirm with ‘OK’. You are now
connected to this specific card and can operate it in the main window (Figure 3).
LS5000 / page
13
