1.6 Installing and removing cards
1.6 Installing and removing cards
The Thorlabs TXP series mainframes are ‘Hot-Swappable’, that means you do not
have to switch off the mainframe while exchanging cards:
•
Loosen the two mounting screws on top and below the ejector handle
•
Push the red button of the ejector handle and flip down the black ejector
handle. This pulls out the card from its internal plug.
You can now remove the card. If you do not insert another card, please close the
empty slot with a blind module to maintain a proper cooling air flow inside of the unit.
Re-tighten the two screws.
LS5000
/ page 10
