2.1 Preconditions
2 Getting Started
This section gives a quick introduction how to operate the LS5000.
2.1 Preconditions
1. Precondition: you have installed and initialized the connection between the
TXP and your PC according to the manual of the corresponding TXP main-
frame.
2. You have installed the card specific software driver (is normally installed
together with the TXP Administrator and TXP Explorer). If not, insert the CD-
ROM delivered with the TXP / card into your CD-ROM drive. If the ‘autorun’
function is active on your PC, the installation program should start automatical-
ly. If not start the program ‘TXP Suite.exe’ on the CD. The installation wizard
leads you through the installation process. When it comes to the type of
installation, select ‘custom’. Then mark the components for the LS modules
and proceed with the installation.
3. Insert the LS5000 card in your TXP mainframe (see 1.6 Installing and
removing cards).
4. Switch on the TXP if not yet done
The TXP system is now ready for operation and you can start the card specific
graphics user interface (GUI).
LS5000 / page
11
