THORLABS EXULUS-HD2, User Manual

Page: 33 / 57

EXULUS
®
Spatial Light Modulators Chapter 4: Setup and Software Operation
Page 30 CTN013676-D02
The SLM software only monitors the LK220 chiller temperature readings. If other
functions require software control, do not connect the LK220 chiller from the SLM
software UI and use its own software instead.
Save and Load
These two buttons provide the save/load of user-defined sequence settings in XML
format.
Options
•
SLM Setting
o
Screen ID: Normally, the main computer screen is recognized
as Screen ID 1 and the SLM panel as Screen ID 2. However, in
some cases, especially for systems with multiple screens, the
SLM’s Screen ID might be different. Therefore, it needs to be
properly set in the SLM Setting Window. Otherwise the SLM
does not respond to all the operations by this application.
Figure 40 SLM Screen ID Setting
o
Screen Flip: Flip the SLM panel in the Horizontal or Vertical
orientation.
o
Default Settings: Save the current settings of Screen Flipping
and Phase Stroke Mode as default.
Note:
Default settings ensures that the Screen Flipping and Phase Stroke Mode are
preserved while unit is switched off.