THORLABS EXULUS-HD2, User Manual

Page: 5 / 57

EXULUS
®
Spatial Light Modulators Chapter 2: Safety
Page 2 CTN013676-D02
Chapter 2 Safety
2.1. Precautions
Please read the instruction manual carefully before operating your Spatial Light
Modulators. All statements regarding safety and technical specifications will only
apply when the unit is operated correctly.
Refer to this User’s Guide whenever the following symbols are encountered on the
Spatial Light Modulators.
DO NOT OPEN HOUSING
Thorlabs’ SLM has no user-serviceable parts. Service should only be performed
by trained service personnel.
SHOCK WARNING
High voltage inside. To avoid electrical shock, before powering up, make sure that
the ground pin of the power cord is correctly connected to the ground connector
in the power socket. Improper grounding can cause electric shock resulting in
severe injury or even death. Do not operate without the cover installed.
WARNING
This unit must not be operated in explosive environments. Do not operate in
wet/damp conditions. Do not obstruct the air ventilation slots in the housing.
WARNING
Transportation and delivery may cause the SLM to be warm or cool upon receipt.
Please wait for the whole device to reach room temperature before attempting to
operate.