THORLABS DCC1 45 Series User Manual Download Page 240

Page: 240 / 420

235

SDK (Software development Kit)

Input Parameters

hCam

Camera handle

nEnable

IS_BL_COMPENSATION_DISABLE

Disables automatic black level correction. The

offset

value is used as black level instead. This mode is only
supported by DCC1545M

camera.

IS_BL_COMPENSATION_ENABLE

Enables automatic black level correction. The

offset

value is added to the automatic black level value.

IS_GET_BL_COMPENSATION

Returns the current mode.

IS_GET_BL_OFFSET

Returns the currently set value for

offset

IS_GET_BL_DEFAULT_MODE

Returns the default mode.

IS_GET_BL_DEFAULT_OFFSET

Returns the default value for

offset

IS_GET_BL_SUPPORTED_MODE

Returns the supported modes.
Possible values:

IS_BL_COMPENSATION_ENABLE

The sensor supports automatic black level correction.

IS_BL_COMPENSATION_OFFSET

For the sensor used, it is also possible to set the

offset

manual.

IS_IGNORE_PARAMETER

The

nEnable

parameter is ignored.

offset

Contains the offset value used for compensation. Valid
values are between

and

255

IS_IGNORE_PARAMETER

The

offset

parameter is ignored.

reserved

Reserved. 0 must be passed.

Return Values

IS_SUCCESS

Function executed successfully

IS_NO_SUCCESS

General error message

Supported modes when used together with

IS_GET_BL_SUPPORTED_MODE

Current mode when used together with

IS_GET_BL_COMPENSATION

Current offset when used together with

IS_GET_BL_OFFSET

408

Summary of Contents for DCC1 45 Series





































































































































































































































































































































































































































Search results

Summary of Contents for DCC1 45 Series

Reviews:

Brands by name

Popular brands

THORLABS DCC1 45 Series, User Manual

Search results

Summary of Contents for DCC1 45 Series

Reviews:

Brands by name

Popular brands