TROUBLESHOOTING GUIDE
REMOVING THE OVEN DOOR
CAUTION
Remark:
a. When E5, E6, E7 appears, you can press Cancel to
cancel.
b. E9 is the power supply frequency monitoring: the
power supply frequency range is between
(38Hz~75Hz), each monitoring time is 5 minutes, if
the frequency continuously exceeds the range within 5
minutes, it is a fault; if there is no AC signal for 5S
continuously, the fault.
c. In the event of E1, E3, E8 failure, you can long press
the (START+Num9) key 3S to enter the door lock reset
action: the door lock motor turns 3S to stop 2S, and
stops after 12 consecutive times, press the Cancel
button to stop.
d. The door is very heavy. Be careful when removing and
lifting the door.
e. Do not lift the door by the handle.Use two hands to
remove an oven door. For double ovens, repeat the
process for each door.· Prior to removing the oven
door,prepare a surface where you will place covered
with a soft blanket. You can also use the corner posts
from your packaging material.· Open the oven door.
23
Summary of Contents for TRG Series
