THOR TRG Series, Use & Care Manual

Page: 39 / 56

How to run a self-cleaning cycle
a. Select the length of time for the self-cleaning operation, eg. 3 hours.
Touch Self Clean 2/3/5h once for a 3 hour clean time, twice for a 5 hour clean time, or 3 times for a 2
hour clean time.The default setting is 3 hours.
b. Touch START to start the self- cleaning cycle.The motor-driven door lock will engage
automatically.
NOTE
· You will not be able to start a self- cleaning cycle if the Control Lockout feature is activated or if the
oven's temperature is too hot.
· The oven door locks automatically. The display will show the cleaning time remaining. You cannot open
the oven door until the temperature drops to a safe/cool temperature.
c. When the self-cleaning cycle is done, End will appear in the display and the oven will beep 6 times.
How to delay the start of self-cleaning
a. Touch Self Clean 2/3/5h.Select the desired self-clean time by touching Self Clean 2/3/5h.
b. Touch Delay Start.
c. Enter the time you want the self-clean cycle to start.
d. Touch START.
The display will show Delay, Self clean, and the Lock icon. The motor-driven door lock will engage
automatically.
e. The Self- Cleaning cycle will turn on automatically at the set time.
How to turn off the self-cleaning feature
If you need to stop or interrupt a self-cleaning cycle:
a. Touch Cancel.
b. You will be able to open the oven door once the oven has cooled down for
approximately 1 hour.
After a self-cleaning cycle
· You may notice some white ash in the oven. Wipe it up with a damp cloth after the
oven cools. (If white spots remain, remove them with a soap-illed steel wool pad and
rinse thoroughly with a vinegar and water mixture.)
· If the oven is not clean after one cycle, repeat the cycle.
You cannot set the oven for cooking until the oven is cool enough for the door.
OVEN COOKING GUIDELINES
19