October 25
th
2013
www.thonk.co.uk
15
Music Thing Modular
Spring Reverb Module
Eurorack DIY Kit
Instructions
Version 0.9
32.
Screw in the two brass hex spacers
into place. Make sure you use two of
the shorter machine screws, not the
two longer screws which are provided
to mount the finished module into
your case.
Now fit the two remaining TL072CP
ICs.
Make sure the circle on the top face
of the ICs are both at the end with the
notch in the IC socket.
NOTE! This spacer may cause the
C2 Electro Capacitor to lean over but
this shouldn’t cause a problem.
33.
Gently splay apart the two 100n
capacitors at the end of the PCB as
shown. The solitary 10uF capacitor
on the other PCB will nestle between
them once the two boards are
connected together.
NOTE!
Don’t push them so far apart
that the leads touch the RCA socket
connections.
Notch
Notch
Circle
Circle
