7
Simple Troubleshooting
Problem Possible
Cause
Solution
Water overflows when using
the machine.
The carbonating button was
pressed for too long.
The water was too full.
1. Press the pressure release button to release
excess CO2
2.
The correct carbonating method is to press
the carbonating button for 0.5 seconds each
time for 2-3 times; fill the water up to the fill
line.
The carbonating bottle cannot
be removed after making
sparkling water.
Excessive CO2 in the bottle
was not fully released.
Press the pressure release button to release
excess CO2
And the carbonating bottle can be removed.
The sparkling water has few
bubbles.
The CO2 carbonator might be
out of gas.
The carbonator temperature is
too low.
The water temperature is too
high.
Replace the CO2 carbonator using the
instructions previously described.
Leave the CO2 carbonator; wait until its
temperature increases to room temperature.
Use drinking water with a lower temperature.
