5
Installation
Step 1: Remove the protective cover
of the carbonator fixture seat.
Step 2: Rotate the carbonator
counterclockwise to tighten it into the
fixture seat.
Step 3: Adjust the connection pan of
the carbonating device to a tilted state;
connect the CO2 carbonating device.
Caution: Do not connect the CO2
carbonating device when the
carbonating device connection pan is
in a parallel state; products damaged
due to this misuse will not be covered
by the warranty.
Step 4: Pour cold water or any other
beverage into the carbonating bottle;
do not exceed the fill line marked on
the bottle.
Step 5: Lock the carbonating bottle
onto the CO2 carbonating device; use
the instructions of Step 3 to connect
the carbonating device connection
pan.
Step 6: Press the CO2 carbonating
button until you hear a hiss after it is
connected; this means it is fully
carbonated. If you prefer stronger
bubbles, continue to press the button to
inject more CO2.
Caution: Do not press and hold down
the button for long periods of time; press
for approximately 0.5-1 second each
time.
Step 7: Adjust the carbonating
connection pan to a tilted state once
carbonation is complete to remove the
carbonating bottle.
Continued Use:
Step 8: It will be in a slow pressure release status
once the silver cover is opened; slow pressure release
is recommended for sparkling drinks. The blue quick
pressure release button can be pressed for sparkling
water to avoid waiting for too long. The CO2
carbonating connector can be removed by rotating it
counterclockwise once pressure release is complete.
Step 9: Use of cold water or beverages
(0.5°C-5.5°C) is recommended; it will give you a
more pleasant taste when drinking.
