10
6.1.2 channel list
Press
OK
in viewing mode to display the current
TV list
. Use
pq
in the channel list to highlight your channel
of choice and press
OK
to switch. Press
OK
again to leave the channel list mode. Inside the channel list it is
possible to use the
PG+/PG-
buttons as well in order to scroll page-wise through the list to speed up.
6.1.3 using
pq
p
switches to the next channel.
q
switches to the previous channel.
6.2 Info Banner
While watching TV, you can press
iNFO
at any time to access information about the current channel
and event*. Press
iNFO
twice for extended EPG details about the current channel. Press
iNFO
three
times for EPG details of the next programme.
* Event information is displayed when available. Availability depends on broadcast.
6.3 Selection of audio language
Some channels support a choice of audio formats and/or languages.
To select another audio stream, press
AUDiO
in viewing mode. A list of available audio streams will
now be displayed. Use
pq
to select a stream and confirm with
OK
. The audio channel as stereo, mix,
left and right can be selected with
t
u
.
6.4 teletext
To access the available Videotext, press the
TEXT
button in viewing mode and use the
0~9
buttons to enter the
number of the page you wish to see. In case of availability you can also use the
cOLOUR BUTTONS
of the remote
control for direct access, as indicated on the bottom of the screen.
Use
pq
to select one page up or down, use
t
u
to select subpages. Press
or
TEXT
to get back to viewing
mode. While in
TEXT
mode, use the
OK
button to select the level of the teletext transparency (five steps possible).
6.5 Subtitles
Some channels support a choice of subtitle languages. Press
SUB
in viewing mode to display a list of
available subtitle languages. Select your subtitle of choice with
pq
and press
OK
to confirm. Press
to leave without making changes.*
* Availability of DVB/Hard of Hearing subtitles depends on the broadcast. If subtitles are not present, they can be activated
via Teletext (if available).
6.6 EPg (Electronic Programme guide)
The Electronic Programme Guide is a very useful function that allows you to view event schedules and
programme information and to mark events/movies for wakeup of the receiver. To access the EPG,
press
EPG
in viewing mode. Use
pq
to select a channel and
t
u
to select an event. Press
OK
to
display detailed information of the selected event. Use
9
to quit the detailed information screen. Press
the
RED
or
GREEN
buttons to see and select another day. Press the
YELLOW
button to set a timer for a
selected event. Refer to section
7.3.4
for details of the timer function.
Note:
Availability of EPG data depends on broadcast.
