8
Amplifier or home cinema set with a suitable cinch cable to the S/PDIF connector on the back of the
receiver. Alternatively, if you’re using an analogue amplifier, then connect the audio output jack for
stereo audio.
connecting to a digital audio amplifier and TV using HDMi
By connecting your receiver to an HDMI equipped digital amplifier or home cinema set you will enjoy
the best possible sound quality and multi-channel audio (depending on broadcast). Connect the HDMI
output of the unit to an input of your amplifier, and then connect the HDMI output of the amplifier to
your TV set. Select the correct input on your amplifier to watch and listen to programmes.
4.0 StArtIng uP For tHE FIrSt tIME
Make sure that your receiver and antenna are connected/aligned correctly. If you have any related
questions accordingly, please contact your local service or retailer. Then switch your receiver “ON” by
using the power switch below the main power cord.
The first time installation will guide you through the required steps, after that you will be able to enjoy
your HD TV completely. If you already connected an Ethernet cable to your receiver, you can access RSS
feeds and weather forecasts. We wish you lots of fun with your new product.
4.1 Language selection
When you use your receiver for the first time, the “Bevorzugte Sprache” (Preferred Language) menu
appears. Use
pq
to select the desired language. Once you have selected your language, press the
GREEN
Next
button to go to the next page.
4.2 region, Subtitles, Scan Mode and screen settings
The receiver will now show the “First Time Installation” screen where you can adapt some of the most
important settings. Use
pq
to move to the desired setting and use
t
u
to change values. Press the
GREEN
Next
button to go to the next page or press the
RED
Back
button to go one step back. The
following settings are available:
Region
:
The region is pre-set to
Germany
. The receiver can only be used in Germany.
Subtitle
: Select
On
to display subtitles per default, select
Off
to hide subtitles per
default.*
Aspect Mode
:
Use this option to select the aspect ratio of the connected TV. The options are:
4:3
for a 4:3 TV (black bars on top and bottom of picture) and
16:9
for 16:9 TV
sets.
Scan mode
: Select
All
to store scrambled and free-to-air channels or select
Free
to store only
free-to-air channels.
* Availability of DVB/HoH subtitles depends on the broadcast. If subtitles are not supported, they can be activated via
Teletext if available.
When all settings have been made, press the
GREEN
Next
button to continue.
4.3 Aerial Adjustment
This part of the wizard is of great help when setting up your antenna system.
Use
pq
to move the highlight to the setting you wish to change and use
t
u
to change values. The
following settings are available:
