TECHNICAL SPECIFICATIONS
P23
En
g
lis
h
Problem
Possible cause
What to do
Forgotten PIN code
Forgotten channel
lock code
Default PIN is
1234
Contact local Service Hotline or
send email to our Support via
www.thomsonstbnet.
After moving the
receiver to another
room/area you are no
longer able to receive
digital reception
Antenna signals are too
weak
The signal strength/quality
might be less than before, if
using an indoor antenna.
Press the
info
button on
remote 3x to call up signal
bars and adjust antenna for
(maximum) reception
or rescan channels
When using an active antenna,
check antenna power.
Try to use an outdoor antenna.
The receiver switches
off automatically.
Auto Standby function
enabled.
Disable auto standby. See
section
7.3.7
for details.
Playback of video (or
Timeshift) is causing
picture freeze/macro
blocks or similar
distortion, especially
on HD content.
Read/write speed of your
USB device could be
too low.
Make sure to use a USB storage
device with sufficient speed and
space. Pen drives (‘USB sticks’)
may not support sufficient
speed.
9.0 TechnicAL sPecificATions
Demodulator
Demodulator:
COFDM; 16 QAM/64 QAM, QPSK
Transmission mode:
2 K - 8 K
video Decoder
Profile level:
MPEG-2 MP@ML, AVC/[email protected], MPEG4 ASP supported
Video resolutions:
480i / 480p / 576i / 576p / 720p / 1080i / 1080p / By Native TV /
By source
Decoding & Video out:
PAL
Aspect ratio:
4:3 Letterbox, 4:3 Pan & Scan, 16:9, Auto
Audio Decoder
Audio support:
AAC/Dolby Digital Plus*/AC3+/PCM
MPEG MusiCam Layer II
Sampling rate:
32, 44.1, 48 KHz
Audio mode:
Stereo, Mono
*Dolby and the double-D symbol are registered trademarks of Dolby Laboratories
