MAIN MENU
P17
En
g
lis
h
Parental Rating
:
Choose between:
Off
,
4 years
and up to
18 years
. Channels with a parental
rating above the chosen age will be protected with a PIN code (if available in
your local broadcast.)
New Password
:
Enter your new PIN code (4 digits) here.
Confirm Password
: Re-enter your PIN code here to confirm.
7.3.6 osD setting
This menu allows you to change settings for:
OSD Timeout
and
OSD Transparency
.
OSD Timeout
:
Sets the duration time of on screen banners and messages remove. The
range is
1~10
seconds or
Always On
.
OSD Transparency
: To set the OSD transparency from
Off ~ 40%
with 10% steps.
Load Default OSD Setting
:
Press
ok
to clear all OSD settings and reset to default values.
7.3.7 Auto standby
Auto Standby is a new feature that helps you reducing power consumption. When set to
30Min/1
Hour/2 Hours or 3 Hours
, the receiver will switch to standby if it doesn’t receive any commands
during this time. Set
Auto Standby
to
Off
to deactivate the automatic standby function.
7.4 Tools
Press
Menu
in viewing mode to enter the
Main Menu
.
Select the
Tools
submenu with
pq
and press
ok
or
u
to enter.
Use
pq
to highlight the submenu of choice and press
ok
proceed.
Press
eXiT
to leave.
7.4.1 information
This submenu shows receiver specific information such as hardware version and software version.
It also displays our web address www.thomsonstb.net. Please have the
Information
screen on
hand when you call our hotline. The person who answers your call might ask for the information
given in this screen.
7.4.2 Load factory settings
This option allows you to reset the receiver to factory settings, which clear all stored channels.
Warning:
By resetting your receiver to factory default, all your settings and stored
channels will be permanently deleted. Please use this option with care.
Use
pq
to select
Load Factory Settings
in the
Tools
menu and press
ok
. You are asked to input
your PIN code.
Input the correct PIN code using the
0~9 (DefAuLT Pin: 1234)
. A confirmation window is displayed.
Select
Yes
to return to factory settings. Select
No
to cancel.
Press
eXiT
to leave.
