P8
sTArTinG uP for The firsT TiMe
3.6 connecting to an analogue Audio Amplifier
Fig. 7
Use the 3.5 mm jack to connect your receiver to the analogue input of your Hi-Fi or audio amplifier
with a 3.5 mm jack to RCA cable for achieving best possible analogue audio quality.
3.7 connecting a usb storage device
Fig. 8
noTe:
It is recommended to use USB 2.0 storage devices or higher for recording and
play back of TV programmes or HD movies.
noTe:
Timeshift/recording and playback only works properly when a fast USB storage
device such as a USB2.0 HDD is connected to the receiver. Timeshift/recording
and playback of HD content requires a sufficient read/write speed of the used
USB storage device.
4.0 sTArTinG uP for The firsT TiMe
When you use your receiver for the first time, the
Welcome
menu appears. Use
pq
to move the
highlight to the setting you wish to alter and use
tu
to change values. Start by selecting your
language using
tu
. Once you have selected your language, press
q
to move the highlight to
the next item and use
tu
to change.
Language
Here you can choose your language.
Region
:
Select your region where this receiver is used.
Subtitle
:
Select
Normal
to display subtitles per default, Select
Hard of Hearing
to show
HoH subtitles per default. Select
Off
to hide subtitles per default.*
Aspect Mode
:
Use this option to select the aspect ratio of your TV and the preferred
conversion method. The options are:
Auto
(automatic detection of aspect
ratio),
4:3 Panscan
(Displays 16:9 widescreen broadcasts full screen on your
4:3 TV),
4:3 letterbox
(black bars on top and under the picture on a 4:3 TV) and
16:9
(use this setting for 16:9 TV sets).
Scan mode
:
Select
All
to store scrambled and free to air channels or select
Free
to store
only free to air channels. Note: Scrambled channels cannot be viewed with
this receiver.
Connection
:
Use this option to adjust the established connection to your TV set. Select
HDMI
or
TV SCART
.
*Availability of DVB/HoH subtitles depends on the broadcast. If subtitles are not supported, they can be activated via
Teletext if available.
When all settings have been made, move the highlight to
OK
and press
ok
to continue.
noTe:
Wrong region selection can lead to missing channels or channels being stored
at wrong positions in the channel list.
The receiver will now advance to the
Aerial Adjustment
screen.
