CONNECTION
P7
En
g
lis
h
3.0 connecTion
3.1 connecting to a terrestrial antenna
Fig. 6
To receive broadcasted signals, your terrestrial indoor or outdoor antenna must be connected
to the ANT IN connector on the back of the receiver. Use a properly shielded antenna cable and
suitable connectors.
The ANT OUT connector allows you to loop the antenna signal to a second receiver or TV set.
Please consider that the looped signal might be too weak if you use an active antenna.
noTe:
If the signals at your location are too weak to receive proper signals with
an indoor antenna, we recommend using an outdoor antenna which can
be pointed towards the transmission tower. Ask your local dealer for more
information.
3.2 connecting to Tv with hDMi cable
Fig. 6
The TV set shall be connected with the receiver using a good quality HDMI cable. This connection
gives the highest possible quality.
3.3 connecting to Tv with scArT cable
Fig. 6
Your receiver is also equipped with a SCART connector; alternatively, the TV set can be connected
to the receiver using a good quality SCART cable.
3.4 connecting to a Digital Audio Amplifier with s / PDif
Fig. 6
By connecting your receiver to a digital amplifier or home theatre system, you can enjoy the best
possible sound quality and multi-channel audio (depending on broadcast). Connect your Digital
Audio Amplifier or home theatre system with a suitable cinch cable to the S / PDIF connector on
the back of the receiver.
3.5 connecting to a digital audio amplifier and Tv using
hDMi
Fig. 6
By connecting your receiver to the latest digital amplifiers or Home Cinema systems you will enjoy
the best possible sound quality and multi-channel audio (depending on broadcast). Connect the
HDMI output of the receiver to an input of your amplifier, and then connect the HDMI output
of the amplifier to your TV set. Select the correct input on your amplifier to watch and listen to
programmes.
