P14
MAin MenU
7.1.3 Satellite and Transponder edit options
When in
Satellite Setting
use the
ReD
TP Edit button to edit Satellites and Transponders.
Use
tu
to switch between Left and Right window. (Satellite List and Transponder List.)
Add:
While in the satellite name list: Press
YeLLoW
to add a new satellite. In
the popup window, enter a satellite name with the key table (press
u
),
selecting a character by using the navigation buttons. Press
ok
to enter
the chosen character. When you have entered the name, navigate to the
on screen and press
ok
on the remote control to confirm the new
name. Select the satellites position E for East and W for West. Longitude:
Use the numeric keys to enter the longitude of the satellite. Save the
settings with
ok
or cancel with
eXiT
.
While in the Transponder list: Press
YeLLoW
to add a new Transponder. In
the popup window enter the frequency, symbol rate and polarity of the
new transponder.
Delete
While in the satellite name list: Press
BLUe
to delete a satellite from the list.
Press
GReen
to delete the selected satellite, select
YeLLoW
to delete all
satellites. Confirm deleting with
ok
or
eXiT
to cancel.
While in the Transponder list: Press
BLUe
to delete a transponder from the
list. Press
GReen
to delete the selected transponder, select
YeLLoW
to
delete all transponders. Confirm deleting with
ok
or
eXiT
to cancel.
Edit
:
While in the satellite name list: Press
ReD
Edit to enter the Sat Edit window.
Select the satellites position E for East and W for West. Longitude: Use the
numeric keys to enter the longitude of the satellite. Enter a satellite name
with the key table (press
u
), selecting a character by using the navigation
buttons. Press
ok
to enter the chosen character. When you have entered
the name, navigate to the
on screen and press
ok
on the remote
control to confirm the new name. Save the settings with
ok
or cancel by
eXiT
.
While in the Transponder list: Press
ReD
Edit to enter the TP Edit window.
Frequency: Use the numeric keys to enter a known frequency of the
satellite transponder. Symbol Rate: Use the
0~9
buttons to enter the
symbol rate of the satellite transponder.
Polarity: Press
tu
to select the polarization of the satellite transponder. V
(Vertical) or H (Horizontal).
After entering all data, press
ok
and confirm with
ok
or press
eXiT
to leave without saving.
Use
GReen
to enter to the Automatic scan window.
noTe:
Deleted satellites and transponders from the pre-installed lists can only be
retrieved by performing a factory reset.
7.1.4 Automatic SAT scan
Select the options if you want to do automatic scan.
Satellite:
Select the satellite you wish to scan, as previously set up in the
Satellite
Setting
menu.