English
9
Choose a channel with the
p
/
q
buttons. Alternatively, you can digit the channel number with the
0~9
buttons on the remote control or press
OK
in viewing mode to display the channel list. The
volume can be adjusted with the
tu
buttons.
6.0 OPERATION
6.1 Changing channels
Following ways are possible for changing channels with your new receiver:
-
Via direct access using the
0~9
buttons.
-
Via the channel list using
OK
and the
PG+/PG-
buttons.
-
Via the
p
/
q
buttons.
6.1.1 Direct access via 0~9 buttons
To gain direct access to a certain channel, simply input its number with the
0~9
buttons on the
remote control. Channel numbers can be up to four digits long. Entering a number with less than four
digits is possible. Just wait a few seconds and your receiver will switch to the selected channel or press
OK
immediately after selecting the channel number.
6.1.2 Channel list
Press
OK
in viewing mode to display the
Channel List
. Use
p
/
q
in the channel list to highlight your
channel of choice and press
OK
once to select the highlighted channel. Press
OK
again to leave the
channel list mode. Inside the channel list it is possible to use the
PG+/PG-
buttons as well in order to
scroll page-wise through the list.
TIP
Use
tu
to toggle between the
All Channel
list and favourite list(s) or
press
FAV
in viewing mode for a list of the available favourite lists.
6.1.3 Using the
p
/
q
buttons
p
switches to the next channel.
q
switches to the previous channel.
6.2 Info Banner
While watching TV you can press the
INFO
button at any time to access current information about
the channel and event*. Press
INFO
twice for technical details about the current channel.
*Event information is displayed when available. Availability depends on the broadcast.
6.3 Selection of audio language
Some channels support a choice of audio formats and/or languages. To select another audio stream,
press
AUDIO
in viewing mode. A list with available audio streams will now be displayed. Use
p
/
q
to select a stream and confirm with
OK
. The audio channel as stereo, mono, left and right can be
selected with the
tu
buttons.
6.4 Teletext
Your receiver includes a fully featured Teletext. To access Teletext, press the
TEXT
button in viewing
mode and use the
0~9
buttons to input the number of the page you wish to see. The coloured
buttons of the remote control allow you to jump to selected pages directly, as indicated on the
bottom of the Teletext screen. Use the
p
/
q
buttons to select one page up or down, use the
tu
buttons to select subpages. Press
or
TEXT
to get back to viewing mode.
6.5 Subtitles
Some channels support a choice of subtitle languages. Press
SUB
in viewing mode to display a list of
available subtitle languages. Select your subtitle of choice with
p
/
q
and press
OK
to confirm. Press
to leave without making changes.*
*Availability of DVB/HoH subtitles depends on the broadcast. If subtitles are not supported, they can be activated via Teletext if available.
