12
with
OK
. When you have finished editing, press
YELLOW
to enter the changes. When all changes
have been made, press
twice. Select
Yes
to save the changes or
No
to discard.
Delete
Press
BLUE
in
Edit Channel
to enable the
Delete
function. The
Delete
sign will move up to indicate
that
Delete
is selected. Use
p
/
q
to highlight a channel and press
OK
to mark it for deletion. When
you have marked all channels you wish to delete, press
twice. A confirmation banner will be
displayed. Select
Yes
to delete the marked channels or
No
to cancel.
7.1.2 Radio Channel List
Basically, the operation of the
Radio Channel List
is the same as in the TV Channel List. The only
difference is that in
Radio Channel List
there is no video information, so it will always display the
background on the preview screen.
7.1.3 Delete all
Use this menu to delete all stored channels. Select
Delete All
with
p
/
q
and press
OK
. The receiver
asks you to enter the pin code.
(DEFAULT PIN: 1234)
. Inside the confirmation window select
Yes
with
tu
and press
OK
to delete or select
No
to cancel.
Warning!
The Delete all function will permanently delete all current channels and all
favourite lists from your receiver, and you are not able to leave the menu
until you search for channels again.
7.1.4 Rename Favourite list
This menu allows you to personalize the names of the 8 available favourite lists.
Use
p
/
q
to select
Rename Favourite List
from the
Edit Channel
Menu and press
OK
to proceed.
The names of all groups are now displayed. Select a favourite group with
p
/
q
and press
OK
to edit
its name. A text field will now pop up at the right of the screen. Use
tu
p
/
q
to select characters
and enter them with
OK
. When you have finished editing, press
BLUE
to save the changes. When all
changes have been made, press
twice to leave this menu.
7.2 Installation
7.2.1 Channel Scan
Use
p
/
q
to select
Installation
, press
OK
or
u
to advance.
Use
p
/
q
to select
Channel Scan
and press
OK
to enter.
Use
tu
to toggle between available scan modes:
By Channel
and
By Frequency
.
If
By Channel
is selected, use
p
/
qtu
to select
Channel No
Symbol Rate
and
Scan QAM
. If
Network Search
is set to On, all channel belonging to the network of your operator will be found,
according to NIT information provided in the signal of the operator.
If
By Frequency
is selected, use
p
/
qtu
and
0 ~ 9
to select
Frequency
,
Symbol Rate
and select the
correct Scan QAM parameter. Highlight
Search
and press
OK
to start scanning. Newly found channels
will be added to the channel list.
If
Network Search
is set to On, all channel belonging to the network of your operator will be found,
according to NIT information provided in the signal of the operator.
NOTE:
Obtain technical data about your cable-operator base channel from
your operator and start a network search from there to find all channels
belonging to the network.
7.2.2 Auto Scan
Use
p
/
q
to select
Installation
and press
OK
or
u
to advance.
Select
Auto Scan
with
p
/
q
and press
OK
to enter.
Select your country and network.
Use
p
/
q
to highlight
Search
. Now press
OK
to start auto scan.
