English
7
3.4 Connecting to a Digital Audio Amplifier with S/PDIF
Fig. 6
By connecting your receiver to a digital amplifier or home theatre system, you can enjoy the best
possible sound quality and multi-channel audio (depending on the broadcast). Connect your Digital
Audio Amplifier or home theatre system with a suitable cinch cable to the S/PDIF connector on the
back of the receiver.
3.5 Connecting to a Digital Audio Amplifier and TV using HDMI
Fig. 7
By connecting your receiver to the latest digital amplifiers or Home Cinema systems you will enjoy
the best possible sound quality and multi-channel audio (depending on the broadcast). Connect the
HDMI output of the receiver to an input of your amplifier, and then connect the HDMI output of the
amplifier to your TV set. Select the correct input on your amplifier to watch and listen to programmes.
3.6 Connecting a USB storage device
Fig. 8
Connecting a USB device to the unit allows you to record TV programmes*, playback movies, music
and picture files. See chapter
7.5.1.
NOTE
It is recommended to use USB 2.0 storage devices or higher for playback
of TV programmes or HD movies.
NOTE
Timeshift/recording and playback only works properly when a fast USB
storage device such as a USB 2.0 HDD is connected to the receiver.
Timeshift/recording and playback of HD content requires a sufficient
continuous read/write speed of the used USB storage device. *
*This user manual describes the full functionality including the recording function and may not be applicable if the software for
recording via USB has not yet been installed.
4.0 STARTING UP FOR THE FIRST TIME
When you use your receiver for the first time, the
Welcome
menu appears. Use
p
/
q
to move
the highlight to the setting you wish to alter and use
tu
to change values. Start by selecting your
language using
tu
. Once you have selected your language, press
q
to move the highlight to the
next item and use
tu
to change.
Region
:
Select your region where this receiver is used.
Language
Here you can choose your language.
Aspect Mode
:
Use this option to select the aspect ratio of your TV and the preferred
conversion method. The options are:
Auto
(automatic detection of aspect
ratio),
4:3PS
(Panscan) (Displays 16:9 widescreen broadcasts full screen on
your 4:3 TV),
4:3LB
(letterbox) (black bars on top and under the picture on a
4:3 TV) and
16:9
(use this setting for 16:9 TV sets).
Subtitle Display
:
Select
On
to display subtitles per default. Select
Hard of Hearing
or
Normal
to show Hard of Hearing or Normal subtitles per default. Select
Off
to hide
subtitles per default.
Scan mode
:
Select
All
to store scrambled and free to air channels or select
Free
to store
only free to air channels. Note: Scrambled channels cannot be viewed with
this receiver.
Provider
:
Select the Provider on your local cable system. If unknown, select other.
From the main menu
Installation
, more options are available to do different
scan types.
When all settings have been made, move the highlight to
Search
and press
OK
to continue.
A search will be executed, this may take some time. A message will be show when finished.
