English
15
Use
p
/
q
to select
Parental Lock
from the
System Setup
menu and press
OK
to proceed. You will be
asked to enter your PIN code.
(DEFAULT PIN: 1234)
Menu Lock
:
Locks the installation menu. You can set
Menu Lock
to
On
or
Off
.
Parental Rating
:
Choose between:
Off
,
10 years
and up to
18 years
. Channels with a
parental rating above the chosen age will be protected with a PIN code (if
rating is available in your local broadcast).
New Password
:
Enter your new PIN code (4 digits) here.
Confirm Password
:
Re-enter your PIN code here to confirm.
7.3.6 OSD Setting
This menu allows you to change settings for:
OSD Timeout
and
OSD Transparency
.
OSD Timeout
:
Sets the duration time of on screen banners and messages remove. The
range is
1~10
seconds or
Always On
.
OSD Transparency
:
To set the OSD transparency from
Off ~ 40%
with 10% steps.
7.3.7 Audio Description
Audio Description is a service by the broadcaster in which the content on screen is being described
for the visually impaired. Select
AD Service
On
and
Use AD as default
also
On
to activate the service.
With
AD Volume Offset
the level of the AD text can be adjusted.
NOTE
Availability of Audio Description depends on the broadcast.
7.3.8 Auto Standby
Auto Standby is a new feature that helps you reducing power consumption. When set to
3, 4 or 5
hours
, the receiver will switch to standby if it doesn’t receive any commands during this time. Set
Auto
Standby
to
Off
to deactivate the automatic standby function.
Default is 3 hours.
7.4 Tools
Press
MENU
in viewing mode to enter the
Main Menu
.
Select the
Tools
submenu with
p
/
q
and press
OK
or
u
to enter.
Use
p
/
q
to highlight the submenu of choice and press
OK
proceed.
Press
to leave.
7.4.1 Information
This submenu shows receiver specific information such as hardware version and software version.
Please have the
Information
screen on hand when you call our hotline. The person who answers your
call might ask for the information given in this screen.
7.4.2 Load Factory Settings
This option allows you to reset the receiver to factory settings, which clear all stored channels.
Warning!
By resetting your receiver to factory default, all your settings and stored
channels will be permanently deleted. Please use this option with care.
Use
p
/
q
to select
Load Factory Settings
in the
Tools
menu and press
OK
. You are asked to input
your PIN code.
Input the correct PIN code using the
0~9
(DEFAULT PIN: 1234)
. A confirmation window is displayed.
Select
Yes
to return to factory settings.
The receiver will return to its initial state and show the
Welcome
page.
Select
No
to cancel.
Press
to leave.
