THOMSON TG790 Setup And User Manual Download Page 70

Page: 70 / 78

E-DOC-CTC-20080118-0075 v1.0

Troubleshooting

7.1

Setup wizard Troubleshooting

The Setup CD does not start automatically

If your computer runs:

Microsoft Windows:

Click the Windows

Start

button.

Click

Run

In the

Open

field, type the following path:

D:\Setup.exe

, where D stands for the drive letter of your

CD- or DVD-ROM drive.

Mac OS X:

On your desktop, double-click the CD icon.

Double-click

Menu

Your Thomson Gateway has not been found

If you see this error during setup, check whether:

The Thomson Gateway is turned on and fully initialized.

Your computer has a valid IP address, that is any address but 0.0.0.0.

No dedicated firewall device or router is placed between your computer and the Thomson Gateway.

No personal network security software (for example firewall software) is running on your computer.

Your computer is correctly connected to the Thomson Gateway

Summary of Contents for TG790














































































Search results

Summary of Contents for TG790

Reviews:

Brands by name

Popular brands

THOMSON TG790, Setup And User Manual

Search results

Summary of Contents for TG790

Reviews:

Brands by name

Popular brands