Quick Installation Guide for MPC-ETN
THOMSON TECHNOLOGY
●
9087A – 198
th
STREET, LANGLEY, BC CANADA V1M 3B1
TELEPHONE: (604) 888-3381
●
EMAIL: [email protected]
●
www.thomsontechnology.com
PM086 REV 1 08/08/28
Connections for Final Configuration:
Connecting to MPC-ETN
1. Connect the RJ45 end of Cable 1 to the intended Thomson Technology controller. (i.e. MEC20
or TSC800)
2. Connect the MPC-COM1 end of Cable 1 to the MPC-ETN port labeled COM1.
Connect MPC-ETN to PC
1. Connect a customer supplied Ethernet cable to the Ethernet port of the MPC-ETN (not the Pass
Through port).
2. Connect the other end of the customer supplied Ethernet cable to the desired Ethernet network.
NOTE:
•
The Ethernet LED will be LIT ‘Green’ if connection is good
•
The PC must reside in the same LAN subnet. I.E. –
10.50.1.
100
