Quick Installation Guide for MPC-ETN
THOMSON TECHNOLOGY
●
9087A – 198
th
STREET, LANGLEY, BC CANADA V1M 3B1
TELEPHONE: (604) 888-3381
●
EMAIL: [email protected]
●
www.thomsontechnology.com
PM086 REV 1 08/08/28
Start Up:
•
Connect 24VDC to the power input connector on the MPC-STD. Make sure that the Protective Earth of the
power supply is connected to the Earth connection of the MPC-ETN
•
Power up the MPC-ETN and start Modbus™ communications with the Thomson Technology device (i.e.
MEC20 or TSC800).
•
Refer to the MPC-ETN default Modbus™ map for MEC20/TSC800 parameter addresses found on included
CD-ROM.
•
Modbus map mec20-R*.pdf
•
Modbus map tsc800-R*.pdf
NOTE: Only used for Programming MPC-ETN. Refer to Step 4 of ‘
Setting the Modbus™ node address
(default 1) and TCP/IP address:
’
