Quick Installation Guide for MPC-ETN
THOMSON TECHNOLOGY
●
9087A – 198
th
STREET, LANGLEY, BC CANADA V1M 3B1
TELEPHONE: (604) 888-3381
●
EMAIL: [email protected]
●
www.thomsontechnology.com
PM086 REV 1 08/08/28
NOTE:
•
Your IT SUPPORT GROUP must assign a ‘Static IP Address’ to the MPC-ETN. The ‘Static
IP Address’ is required so that the MPC-ETN device will work correctly on your Ethernet
Network.
4. Connect the PC end of the programming cable to the PC and connect the MPC-COM1 end of the
programming cable to the MPC-ETN COM1 port.
5. Press the Download button of the Gateway Utility Software toolbar.
Enter the required Modbus
Node number (the default node
is 1).
Press the
Extended Setup
button for the TCP/IP setup.
Enter the TCP/IP information
and press the
OK
button.
