27
Chapter title
EN
27
Other information
Memory card sockets (input) on the side
These can be used to connect memory cards.
The following formats are supported: SM, SD, MMC, MS, MS Pro, XD, CF and MD.
To display images using the equipment connected, press the
AV
button on the remote
control: once to select AV1, twice to select AV2, etc. For some equipment (connected to the
SCART sockets), this selection is done automatically.
DVB - CI socket (at side)
This can be used to connect a common interface module (CAM) for inserting a subscription
card for pay-per-view channels. The pushbutton can be used to remove the module. This
module may be purchased from specialist resellers or supplied by the broadcaster of the
programmes whom you have subscribed to. The relevant subscription card is also supplied
by the broadcaster.
Insert the card in the common interface module card reader. Handle the card with care. Do
not clean it.
Cinch audio sockets (output) at the back
These can be used to connect a stereo amplifi er, a hi-fi system or amplifi ed speakers (see
further below).
Cinch audio + video sockets (output) at the back
These can be used to connect a Home Cinema amplifi er.
Digital audio socket (DIGITAL OUT) at the side (digital reception only)
This can be used to connect a digital audio amplifi er.
Connecting active speakers or an amplifi er
The audio cinch sockets on the side of the set can be used to connect active speakers (with
a built-in amplifi er) or an amplifi er.
Connect the left speaker to the cinch L socket and the right speaker to the cinch R socket.
To connect an amplifi er, you should connect the cinch left L and right R sockets to the
amplifi er’s L and R inputs.
Connecting headphones
Use the relevant socket on the side of the TV set to connect headphones or stereo
earphones. Refer to page 16 on how to adjust the headphone volume.
Connecting a video recorder
You are recommended to connect a video recorder via the SCART socket to obtain
optimum picture and sound quality. However, you can also connect a video recorder to the
TV set only using the aerial socket.
If you select the latter option, switch the video recorder on and play a tape. Then use the
Automatic update
option from the
Automatic installation
menu to search for
the appropriate channel for the video recorder (refer to the relevant section). You should
assign channel 99 to it to ensure enhanced picture quality when tapes are being played and
in pause mode.
AUDIO
DIGITAL OUT
video
L
R
monitor
OUT
130-EN-DVBT.indd 27
130-EN-DVBT.indd 27
26/01/06 14:19:16
26/01/06 14:19:16
Summary of Contents for Intuiva
Page 2: ......
