8
EN
Time
The default time displayed is GMT. If you are in a different time zone you can change the time
as follows:
1.
Select
time
from the options menu and press OK.
2.
Select
hour
and change the time using the buttons.
Note: The TV set only displays the time if it is receiving a digital signal.
Upgrade
You have the option to upgrade your digital receiver by downloading the latest version of the
software available. The procedure for doing this is as follows:
1.
Select
upgrade
from the
options
menu and press OK.
2.
The version of the software currently being used is shown on the right side of the screen.
Press the red button to check whether a later version is available. If there is one, you can
download it by pressing OK.
Notes:
- Do not switch off the TV set while you are downloading the software.
- In certain circumstances, you may be informed automatically that there is an upgrade available.
In this case, follow the instructions on the screen.
Press EXIT to return to the options menu.
Aerial power supply
If the TV set’s aerial needs to be powered via the aerial cable the required procedure is as
follows:
1.
Press
the
DIGITAL
button on the remote control.
2.
Press
the
MENU
button to display the
OVERVIEW
menu. Select
Installation
and
press OK. Select the
Installation
option from the
Installation
menu and press OK.
3.
Select
antenna powering
and press OK.
4.
Select the option
ON
in the screen that appears using the buttons.
Press the EXIT button as many times as required to exit the menus.
Parental lock
This function is used to restrict access to channels.
Defi ning a PIN code
To be able to use the functions in the parental lock menu, you need to fi rst defi ne a 4-digit
PIN code as follows:
1.
Press
the
DIGITAL
button on the remote control.
2.
Press
the
MENU
button to display the
OVERVIEW
menu. Select
Installation
and
press OK. Select the
Installation
option from the
Installation
menu and press OK.
3.
Select
PIN code
and press OK to confi rm. Enter the relevant PIN code in the screen
that appears. Enter the default code
0000
the fi rst time you defi ne a PIN code.
4.
The
PIN code
menu appears. Enter a 4-digit code using the numeric buttons on the
remote control. The numbers are replaced by asterisks on screen.
5.
Enter your code again to confi rm it.
Note: Choose a code that is easy for you to remember.
The code is changed and the
Installation
menu appears.
Follow the same procedure if you want to change your code again.
Note: If you forget your PIN code you can cancel it by restoring the digital receiver’s default
confi guration, but all the information that you have saved will be lost.
Press the EXIT button as many times as required to exit the menus.
Digital reception - Other functions
time setting
hour
15:22
upgrade
available release
current release
not scanned
7.12.00
PIN code
enter new PIN code
- - - -
antenna powering
power
ON
If you use an indoor antenna powered by RF
connection (5V, 30mA), please switch this
value to ON.
130-EN-DVBT.indd 8
130-EN-DVBT.indd 8
26/01/06 14:19:07
26/01/06 14:19:07
Summary of Contents for Intuiva
Page 2: ......
